Pump Function | Maximum PSI | GPM Nominal |
|---|---|---|
Clamp | 2800 | 50 , 35 , 8 |
Injection | 2490 | 50 , 35 , 8 |
Screw rotation | ||
Range 1: | 2550 | 50, 8 |
Range 2: | 1550 | 50 , 35 , 8 |
Clamp Hold, Ejector & Core | 2900 | 19 Piston |
Plastic Equipment HPM
Created: prior to 2018
Plastic
INJECTION MOLDER: - Last updated June 2010
1993 500 Ton HPM, 48 oz Injection Molding Machine
Serial# 92327. 3 barrels, endcaps, tips, valves, seals and
spare hydraulic components.
From the Technical Specifications of the custom manual:
Clamp:
Clamp force, US tons: 500
Clamp opening Force, US tons: 29
Clamp stroke, mox, in: 38
Daylight, open, in
Without ejector assembly: 60
With ejector assembly: 50
Platen size, h x v in: 50 x 50
Distance between tie rods, h x v, in: 34 x 34
Tie rod diameter, in: 5.5
Clamp speed, ave, in/sec
High speed, closing, adj: 35
opening, adj 36
Mold setting, closing: 3.5
opening: 3.5
Hydraulic Ejector:
Force, US ton, hydraulic: 12
Ejection speed, in/sec: 9
Reset speed, in/sec: 14
Storke, in: 6
General:
Conveyor opening, w x h, in: 54.6x24
machine dimensions, l x w x h, in: 375 x 90 x 128
Machine weight, lbs: 58,200
Hopper capacity, lbs: 150
Injection:
Injection capacity, cu in: 89
Injection capacity, GPPS, oz; 48
Plasticizing capacity (1), continuous, lbs/hr: 790
Recovery rate (1), oz/sec; 3.5
Injection pressure, max, psi: 20,000
Injection rate (2), cu in/sec: 39.1
Screw diameter, in: 3
Barrel L/D ratio: 20:1
Screw torque / speed (3), in-lb/rpm
Range 1: 31,960/150
Range 2: 18,900/255
Barrel heating capacity, 3-zones, kW 35
Nozzle heating capacity, std, W: 1300
Electrical System:
Electric motor, hp/rpm One (1), Double-End-Shaft: 100/1800
Power supply, std, v/ph/Hz: 460/3/60
Full load amps, max, 460 V: 175
Hydraulic System:
Pump output, total nom, gpm: 112\ Reservoir capacity, gal: 500
- Based on general purpose polystyrene per SPI test procedure with 15 Deg. F max melt temperature variation and 50% injection capacity.
- Calculated using pump output @ 10,000 psi material pressure.
- Calculated using pump output @ rated torque and overall efficiency of hydraulic motor
Manufacturer: HPM Corporation
For more information - click on the Contact Peter link to the left, I'll try to answer your questions as quickly as possible (see notes on the link page) and I can send higher resolution (close up) photos too.
